H

Utilizing state-of-the-art technology RAM Audio introduces the W Series 2 and 4-channel high end power amplifiers with output ratings up to 12 kW . Dual PFC QuantaPulse switched-mode power supplies provide increased, smooth output irrespective of mains fluctuations. Housed in 46 cm deep, 2U rackmountable reinforced steel chassis the 7 high-power models are easily portable weighing in at 10 - 12 kg only.

The W Series features Neutrik XLR and Speakon connectors, a large blue LCD user interface and 13-detent digital encoders for convenient gain, bridge mode, input link and ICL setting. A DSP loudspeaker management system is optionally available.

• Main Features
• high-efficiency power amplifiers with up to 12 kW RMS output power
• regulated PFC QuantaPulse dual switch-mode power supply
• digital control with large blue LCD interface
• temperature and output level indication
• USB port for firmware updates and DSP control
• gain, bridge mode, input links and ICL configurable via 13-detent digital encoders on the front panel
• RAM Audio power management system (PMS)
• high-efficiency oversized output transistors for maximum reliability under extreme operating conditions
• easily removable front panel for dust filter cleaning, Neutrik XLR and Speakon connectors 

PMS™: a complete Power Management System that monitors the essential parameters for safe operation. It precisely controls the power supply to the amplifier and output power under extreme and dangerous conditions:

• if the internal operating temperature approaches emergency shutdown during irregular operating conditions,
• if the power supply draws excessive current under laboratory conditions or during extended acoustic feedback.

ICL™: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions.

QuantaPulse™ Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.

Technical Specifications:

• Product type: Power amplifier
• Type: 4-channel
• Output power (1 kHz  2 ohms): 4x 3025 W
• Output power (1 kHz  4 ohms): 4 x 1600 W
• Output power (1 kHz  8 ohms): 4 x 820 W
• Output power (1 kHz  4 ohms, bridged mode): 2 x 6050 W
• Output power (1 kHz  8 ohms, bridged mode): 2 x 3200 W
• Circuit concept: Class H
• Frequency response: 20 - 20,000 Hz
• THD: < 0,05 %
• S/N ratio: 113 dB
• Damping Factor: > 500
• Crosstalk: > 80 dB
• Voltage gain: 26 - 38 dB
• Input sensitivity: 4.1 dB / 2.0 dB / 1.0 dB
• Input impedance: unbalanced 10 kohms, balanced 20 kohms
• Protection: Soft start, power on/off transients, power on muting, overheating, DC voltage, high frequency, short circuit, open outputs, and speaker load mismatching
• Controls: Power, 2 x volume, dual/bridge switch
• Indicators: Clipping, ready, signal, temperature, fault
• Line input connectors: 4 x XLR
• Line output connectors: 4 x XLR
• Speaker output connections: 4 x Speakon
• Cooling system: fan
• Power supply: 230 V
• Power consumption  full load: 14 A
• Width: 483 mm
• Height: 89 mm
• Depth: 460 mm